• Home
  • Download
    • Stringer Topo
    • Stringer ASpec
    • Stringer ePlan
    • Lot Utilities for Civil 3D
    • CSD Siteworks
    • Civil Site Design Software (Land Development)
  • Buy
    • Stringer Topo
    • Stringer ASpec
    • Stringer ePlan
    • CSD Siteworks
    • Sales Enquiry
  • Videos
  • Learn
  • Support
  • Contact
  • Search
Stop Next

Help System

Stringer Topo
Getting Started Guide
Stringer Topo Commands
Point Styles (CAD Only)
Settings
Connect
Stringing
Point Groups (Civil 3D Only)
Points (CAD Versions Only)
Surface (CAD Versions only)
.Parameters
Point Edits
Validation
3D View
Cadastral
Surface Display (Civil 3D Only)
Output
Utilities
Admin
Stringer ASpec
Stringer DSpec
Dspec Commands
DSpec Video Resources
Stringer RSpec
RSpec Commands
RSpec Video Resources
Stringer OSpec
Stringer ePlan
ePlan Commands
ePlan Video Resources
Stop Next

Stringer DSpec Commands

Below are the commands for this ribbon tab.  Any commands specific to Civil 3D or AutoCAD/BricsCAD will be noted with the command.

DSPEC NewRibbon

 

IMPORTANT
It is Critical that you do the Attributes on all your PITS before doing any PIPES. (See pipe picture below)

Note

When you install Stringer DSpec you will get a number of CSV files that make up the forms being installed in 

C:\ProgramData\CSS\Stringer CAD 201?\DSPEC 

In here there is a SAMPLE folder. These are the standard CSV files for Stringer DSpec. If you want to change these CSV files, copy the SAMPLE folder and give it a new name. Once you have done this you can then edit the CSV files in the copied folder. When you go to use Stringer DSpec for the first time it will ask you to nominate a folder e.g. Civil Survey Solutions and will use the CSV files in this folder. This is required as some councils differ in their requirements and multiple folders may be needed.

When a new Build of DSpec is done any new CSV files in the SAMPLE folder will override the OLD CSV files. The copied Folder with the new name will stay the same.

Just be careful changing the CSV Files because if you don't keep the same format then it will not work and you will have to send to us to be looked at.


              

DSpec Settings

Takes you to the CSV files to add or remove data from drop down lists

 

Add All DSpec Data

It allows you to select any item in the drawing and then choose what DSpecAttibutes you want to add to that item.
 
Firstly, select the type of data being attributed.
 
DSPEC_OSDS-Area
DSPEC_OSDS-Swale
DSPEC_Pits
DSPEC_Pipes
DPSEC_Prop
DSPEC_HEWalls
DSPEC_Graphics
DSPEC_Problems
DSPEC_Cond_Pits
DSPEC_Cond
 
Images are shown, right.  Click to enlarge.
 
 
 
 
 
DSPEC_PITS = It is Critical that you do the Attributes on all your Pits before doing any Pipes.
DSPEC_PIPES = The programme now allows the user to select a line that is drawn from Invert Point to Invert Point.

The levels of the points are used for the inverts, the length is calculated from the selected line, and then the line is altered to go from pit centre to pit centre.

 

Picture of Pipes before Attributes are added

DSpecPipes before

 
Picture of Pipes After Attributes are added
 
DSpecPipes after 1  

DSpec ALLDSpecData

DSpec OSDSAreaForm

DSpec OSDSSwaleForm

DSpec PitsForm

DSpec PipesForm

DSpec PropsForm

DSpec HEWallsForm 

DSpec GraphicsForm 

DSpec ProblemsForm

DSpec Conduit PitsForm

 DSpec ConduitsForm 

List All DSpec Data

List all data of the selected Item e.g. All Pits. If you close it down again and then pick a Pipe say, it will then show you all the Pipes in the drawing all at once. It will zoom to that Item in the drawing and when you expand the + button it will show you the details in there from the form that was filled out. The green ones are the ones that don't have the Attributes on them and the Black ones are the ones that are completed.

List Data

List All Empty Data

Anything that hasn't been attributed in the drawing will show up in this display. If you pick on the item in the list it will zoom to it in the drawing and be highlighted as well so you can see which one it is.

List Empty Data

Remove All DSpec Data

It removes all Stringer DSpec attributes in the drawing for the item selected. If I select a pipe, all the attributes in the drawing for pipes will be removed.

 

 

Export to GIS

A DSpec function specifically created to make a MIF/MID or Shape file from the xdata created on DSpec data in the drawing

stringerdspec exporttogis

Export to Map3D

Exports data to Map3d data Tables. All Dspec data can now be seen in the Object Properties Display. The Mapexport command is then to be used to Export data out using Map3D.

(Not available on AutoCAD and BricsCAD versions)

 

 

Map Export

Exports Map3D data using the Map Export Function for Map3D.

(Not available on AutoCAD and BricsCAD versions)

Site Map

  • Home
  • Download
  • Buy
  • Videos
  • Learn
  • Support
  • Contact
  • Search

About

  • About
  • Request a Demonstration
  • Stringer Survey Blog
  • Frequently Asked Questions
  • Release Notes
  • Webinars and Events

CSD Siteworks

  • About
  • Brochure
  • Download
  • Video Overview
  • Video Tutorials

Customer Resources

  • Stringer Blog
  • Release Notes
  • Subscription Renewal
  • Stringer Help System
  • CSD Siteworks Help System
  • Imperial Settings Override
  • Request Support
  • Subscription Login
  • Software Activation
  • Home Use Licensing
  • Offline License Activation
  • Download Brochure
  • Help System
  • Support
  • Subscription Portal
  • Stringer Blog
  • Follow via Youtube
  • Follow via LinkedIn

Stringer Survey is developed by:

AME Surveys Pty Ltd

&

Civil Survey Solutions

 

 

Copyright © Stringer Topo 2018 All rights reserved. Custom Design by Youjoomla.com
Stringer DSpec